INSTRUCTION
IONIZING BLOWER DC-Z01HD
HHD-TOOLS
Operation/Maintenance Instruction
SECTION 1 Description
The desktop ionizing blower produces an airflow that is rich in positive and negative ions. Directing the airflow on an object that has a static electricity charge will neutralize the charge.
The desktop ionizing blower is a portable ionized air blower. It uses a small fan to produce airflow. The volume of airflow is controlled by a variable speed control, which provides a wide range of airflow setting. The high voltage AC is applied to a circular arrangement of tungsten steel ion emitter points, which results in an intense alternating electric field at the tip of the emitter points. It is this electric field that creates alternating polarity ions in the airflow. To assure that the unit is working properly, the high voltage AC is monitored by an ionization indicator lamp.
The desktop ionizing blower features a patented balancing circuit. Also features a patented built-in emitter point clear. Using the point clear takes only seconds. Cleaning the emitter points on a weekly basis prevents the build-up of airborne debris all electrical ionizers are prone to. This keeps your blower working in top form for the life of the unit.
The desktop ionizing blower was designed for use with sensitive electronic components, where electrostatic discharge is a problem. The desk-top ionizing blower can also be used where static electricity causes problems such as: attraction of dirt to product, misalignment of small parts due to electrostatic “jumping” and undesirable adhesion of plastic films due to electrostatic charge.
SECTION 2 Features
![](https://hhd-tools.com/wp-content/uploads/2023/09/DC-Z01HD-3-300x254.jpg)
SECTION 3 Specifications
Input Voltage | 110VAC/220VAC |
Maximum power | 50W |
Ion balance | ≦ ±10V |
Dissipation range | From1000V to 100V < 1.5S(Maximum air volume)
(According to ESD—STM3.1—2000 Ionization) |
Air Coverage | 30cm*150cm |
Ozone Volume | < 0.005 ppm(15cm away from the ionizer) |
Working Temperature | 0—50℃ |
Fan Speed | 250—500FPM@30cm(Continuously adjustable) |
Noise | 50—57dB@60cm |
Indicator Light | Illuminating -High-voltage generating ions |
Weight | 2.4KG |
Dimension | 14*21.8*8.3cm |
Optional Part | Foam filter (30PPI Open Cell Polyurethane Foam) |
Maintenance | Cleaning, Testing, Calibration |
Suggestion | Rotating the ionizing needle cleaning knob on time |
ION OUTPUT (DISCHARGE TIME)
Away from lonizer | Left 300mm | Center line | Right 300mm |
300mm | 1.3sec | ||
600mm | 3.2sec | 2.5sec | 3.3sec |
900mm | 6.4sec | 4.6sec | 6.5sec |
- Distance measured in mm, decay time measured in
- Test data available using ME 268A charges plate
- Test figures are subject to the variation in the atmospheric
- Discharge times are in seconds from 1000 volts to 100 volts.
Đánh giá
Chưa có đánh giá nào.